# autoMakefile.in generated by automake 1.16.2 from autoMakefile.am.
# autoMakefile.  Generated from autoMakefile.in by configure.

# Copyright (C) 1994-2020 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# SPDX-License-Identifier: GPL-2.0

#
# This file is part of Lustre, http://www.lustre.org/
#

am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/lustre
pkgincludedir = $(includedir)/lustre
pkglibdir = $(libdir)/lustre
pkglibexecdir = $(libexecdir)/lustre
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = x86_64-pc-linux-gnu
target_triplet = x86_64-pc-linux-gnu
#am__append_1 = lustre_access_log.h lustre_barrier_user.h \
#	lustre_disk.h lustre_lfsck_user.h lustre_log_user.h

subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/autoMakefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = lustre.spec lustre-dkms.spec \
	lustre/kernel_patches/targets/6.12-rhel10.1.target \
	lustre/kernel_patches/targets/6.12-rhel10.0.target \
	lustre/kernel_patches/targets/5.14-rhel9.7.target \
	lustre/kernel_patches/targets/5.14-rhel9.6.target \
	lustre/kernel_patches/targets/5.14-rhel9.5.target \
	lustre/kernel_patches/targets/5.14-rhel9.4.target \
	lustre/kernel_patches/targets/5.14-rhel9.3.target \
	lustre/kernel_patches/targets/5.14-rhel9.2.target \
	lustre/kernel_patches/targets/5.14-rhel9.1.target \
	lustre/kernel_patches/targets/5.14-rhel9.0.target \
	lustre/kernel_patches/targets/4.18-rhel8.10.target \
	lustre/kernel_patches/targets/4.18-rhel8.9.target \
	lustre/kernel_patches/targets/4.18-rhel8.8.target \
	lustre/kernel_patches/targets/4.18-rhel8.7.target \
	lustre/kernel_patches/targets/4.18-rhel8.6.target \
	lustre/kernel_patches/targets/4.18-rhel8.5.target \
	lustre/kernel_patches/targets/4.18-rhel8.4.target \
	lustre/kernel_patches/targets/4.18-rhel8.3.target \
	lustre/kernel_patches/targets/4.18-rhel8.2.target \
	lustre/kernel_patches/targets/4.18-rhel8.1.target \
	lustre/kernel_patches/targets/4.18-rhel8.target \
	lustre/kernel_patches/targets/3.10-rhel7.9.target \
	lustre/kernel_patches/targets/3.10-rhel7.8.target \
	lustre/kernel_patches/targets/3.10-rhel7.7.target \
	lustre/kernel_patches/targets/3.10-rhel7.6.target \
	lustre/kernel_patches/targets/3.10-rhel7.5.target \
	lustre/kernel_patches/targets/4.14-rhel7.5.target \
	lustre/kernel_patches/targets/4.14-rhel7.6.target \
	lustre/kernel_patches/targets/4.12-sles12sp4.target \
	lustre/kernel_patches/targets/4.12-sles12sp5.target \
	lustre/kernel_patches/targets/4.12-sles15sp1.target \
	lustre/kernel_patches/targets/5.3-sles15sp2.target \
	lustre/kernel_patches/targets/5.3-sles15sp3.target \
	lustre/kernel_patches/targets/5.14-sles15sp4.target \
	lustre/kernel_patches/targets/5.14-sles15sp5.target \
	lustre/kernel_patches/targets/6.4-sles15sp6.target \
	lustre/kernel_patches/targets/6.4-sles15sp7.target \
	lustre/kernel_patches/targets/3.x-fc18.target \
	lustre/kernel_patches/targets/5.10-oe2203.target \
	lustre/kernel_patches/targets/5.10-oe2203sp1.target \
	lustre/kernel_patches/targets/5.10-oe2203sp2.target
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
	config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
am__DIST_COMMON = $(srcdir)/autoMakefile.in $(srcdir)/config.h.in \
	$(srcdir)/lustre-dkms.spec.in $(srcdir)/lustre.spec.in \
	$(top_srcdir)/config/compile $(top_srcdir)/config/config.guess \
	$(top_srcdir)/config/config.sub \
	$(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
	$(top_srcdir)/config/missing \
	$(top_srcdir)/lustre/kernel_patches/targets/3.10-rhel7.5.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/3.10-rhel7.6.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/3.10-rhel7.7.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/3.10-rhel7.8.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/3.10-rhel7.9.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/3.x-fc18.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.12-sles12sp4.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.12-sles12sp5.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.12-sles15sp1.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.14-rhel7.5.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.14-rhel7.6.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.1.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.10.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.2.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.3.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.4.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.5.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.6.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.7.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.8.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.9.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.10-oe2203.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.10-oe2203sp1.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.10-oe2203sp2.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.0.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.1.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.2.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.3.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.4.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.5.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.6.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.7.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.14-sles15sp4.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.14-sles15sp5.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.3-sles15sp2.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/5.3-sles15sp3.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/6.12-rhel10.0.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/6.12-rhel10.1.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/6.4-sles15sp6.target.in \
	$(top_srcdir)/lustre/kernel_patches/targets/6.4-sles15sp7.target.in \
	COPYING ChangeLog README
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /home/green/git/lustre-release/config/missing aclocal-1.16
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
AR = ar
AUTOCONF = ${SHELL} /home/green/git/lustre-release/config/missing autoconf
AUTOCONF_HDIR = generated
AUTOHEADER = ${SHELL} /home/green/git/lustre-release/config/missing autoheader
AUTOMAKE = ${SHELL} /home/green/git/lustre-release/config/missing automake-1.16
AWK = gawk
BASH_COMPLETION_DIR = /usr/share/bash-completion/completions
BISON = /bin/bison
CC = gcc
CCAS = gcc
CCASDEPMODE = depmode=gcc3
CCASFLAGS = -Wall -fPIC -D_GNU_SOURCE
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -Wall -Werror  -Wno-gnu
CONFIG_CACHE_FILE = /home/green/git/lustre-release/config.cache
CPP = gcc -E
CPPFLAGS = -include /home/green/git/lustre-release/config.h -I/home/green/git/lustre-release/include/uapi -I/home/green/git/lustre-release/lnet/utils/ -I/home/green/git/lustre-release/include -I/home/green/git/lustre-release/include/uapi 
CUDA_PATH = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEBUGFS = debugfs
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DSYMUTIL = 
DUMPBIN = 
DUMPE2FS = dumpe2fs
E2FSCK = e2fsck
E2FSPROGS = e2fsprogs
E2LABEL = e2label
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EFALND = 
EFA_INCLUDE_PATH = 
EGREP = /bin/grep -E
ENABLEO2IB = yes
ENABLE_BACKOFF = yes
ENABLE_CHECKSUM = yes
ENABLE_COVERAGE = n
ENABLE_CRYPTO = 
ENABLE_DOC = 0
ENABLE_EFENCE = no
ENABLE_FAIL_ALLOC = yes
ENABLE_FLOCK = yes
ENABLE_GNI = no
ENABLE_GSS = yes
ENABLE_INVARIANTS = no
ENABLE_LDISKFS = yes
ENABLE_LIBCFS_ASSERT = yes
ENABLE_LIBCFS_CDEBUG = yes
ENABLE_LIBCFS_TRACE = yes
ENABLE_LIBPTHREAD = yes
ENABLE_LRU_RESIZE = yes
ENABLE_MINDF = no
ENABLE_MULTIPLE_LNDS = no
ENABLE_PANIC_DUMPLOG = no
ENABLE_PGSTAT_TRACK = no
ENABLE_PINGER = yes
ENABLE_READLINE = yes
ENABLE_SERVER = yes
ENABLE_ZFS = yes
EXEEXT = 
EXT2FS_CFLAGS = -I/usr/include/ext2fs -I/usr/include/et 
EXT2FS_LIBS = -lext2fs 
EXT4_CRYPTO = crypto.c
EXT4_SRC_DIR = /home/green/bk/linux-5.14.0-570.58.1.el9_6/fs/ext4
EXT4_VERITY = verity.c
EXTRA_CFLAGS =  -Wno-gnu
EXTRA_KCFLAGS = -include /home/green/git/lustre-release/config.h  -g -I/home/green/git/lustre-release/lnet/include -I/home/green/git/lustre-release/lustre/include -I/home/green/git/lustre-release/include -Wno-format-truncation -Wno-stringop-truncation -Wno-stringop-overflow -Wno-gnu
EXTRA_OFED_CONFIG = 
EXTRA_OFED_INCLUDE =  -I/include -I/include/uapi
EXTRA_SYMBOLS =  /usr/local/src/zfs-2.3.4/5.14.0rocky96-debug/Module.symvers
EXT_O2IBLND = o2iblnd
EXT_O2IBPATH = 
EXT_O2IB_SYMBOLS = 
EXT_O2IB_VER = None
FGREP = /bin/grep -F
FLEX = /bin/flex
GDS_PATH = 
GNICPPFLAGS = 
GNILND = 
GREP = /bin/grep
INSTALL = /bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INT_O2IB_SYMBOLS = 
ISA_L_LIBRARY = ../../erasurecode/libec.a
K5VERS = 1211
KFICPPFLAGS = 
KFILND = 
KMP_MODDIR = extra/kernel
KRBCFLAGS = 
KRBDIR = /usr
KRBLDFLAGS = 
KRBLIBS = -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err
LD = ld -m elf_x86_64
LDFLAGS = 
LDISKFS_SERIES = 5.14-rhel9.6.series
LDISKFS_SUBDIR = ldiskfs
LDLIBMOUNT = -lmount
LIBEFENCE = 
LIBNL3_CFLAGS = -I/usr/include/libnl3 
LIBNL3_LIBS = -lnl-genl-3 -lnl-3 
LIBOBJS = 
LIBREADLINE = 
LIBS = -lkeyutils -lkeyutils 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LINUX = /home/green/bk/linux-5.14.0-570.58.1.el9_6
LINUXRELEASE = 5.14.0rocky96-debug
LINUX_OBJ = /home/green/bk/linux-5.14.0-570.58.1.el9_6
LIPO = 
LLVM = 
LLVM_IAS = 
LN_S = ln -s
LTLIBOBJS = 
LT_SYS_LIBRARY_PATH = 
LUSTRE = /home/green/git/lustre-release/lustre
LUSTREIOKIT_SUBDIR = lustre-iokit
MAINT = 
MAKEINFO = ${SHELL} /home/green/git/lustre-release/config/missing makeinfo
MANIFEST_TOOL = :
MKDIR_P = /bin/mkdir -p
MKE2FS = mke2fs
MPICC_WRAPPER = mpicc
MPI_BIN = 
NM = /bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = lustre
PACKAGE_BUGREPORT = https://jira.whamcloud.com/
PACKAGE_NAME = Lustre
PACKAGE_STRING = Lustre 2.17.54_83_g41c4b75
PACKAGE_TARNAME = lustre
PACKAGE_URL = 
PACKAGE_VERSION = 2.17.54_83_g41c4b75
PATH_SEPARATOR = :
PFSCK = fsck
PKGCONF = /bin/pkg-config
PKG_CONFIG = /bin/pkg-config
PKG_CONFIG_LIBDIR = 
PKG_CONFIG_PATH = 
PTHREAD_LIBS = -lpthread
RANLIB = ranlib
RELEASE_ID = 1
RPMBUILD = /bin/rpmbuild
RPMBUILD_BINARY_ARGS =  --define "configure_args  '--with-zfs=/usr/local/src/zfs-2.3.4' '--with-zfs-devel=/usr/local'" --define "kdir /home/green/bk/linux-5.14.0-570.58.1.el9_6" --define "kobjdir /home/green/bk/linux-5.14.0-570.58.1.el9_6" --with zfs --with gss_keyring --with gss --with gss --without multiple_lnds --without mofed --with o2ib --without kfi --without gni --without shared --without mpi
SED = /bin/sed
SELINUX = -lselinux
SET_MAKE = 
SHELL = /bin/sh
SPL = 
SPL_OBJ = 
STRIP = strip
SYMVERFILE = Module.symvers
TEST_DIR = /home/green/git/lustre-release/_lpb
TEST_JOBS = 12
TUNE2FS = tune2fs
VERSION = 2.17.54_83_g41c4b75
VERSION_HDIR = generated/uapi/linux
ZFS = /usr/local/src/zfs-2.3.4
ZFS_LIBZFS_INCLUDE = -I /usr/local/usr/include/libspl -I /usr/local/usr/include/libzfs
ZFS_LIBZFS_LDFLAGS = -L/usr/local/usr/lib64 -L/usr/local/usr/lib -L/usr/local/lib64 -L/usr/local/lib
ZFS_LIBZFS_LIBS = -lzfs -lnvpair -lzpool
ZFS_OBJ = /usr/local/src/zfs-2.3.4/5.14.0rocky96-debug
ZFS_VERSION = 2.3.4-1
abs_builddir = /home/green/git/lustre-release
abs_srcdir = /home/green/git/lustre-release
abs_top_builddir = /home/green/git/lustre-release
abs_top_srcdir = /home/green/git/lustre-release
ac_configure_args =  '-C' '--with-linux=/home/green/bk/linux-5.14.0-570.58.1.el9_6' '--with-zfs=/usr/local/src/zfs-2.3.4' '--with-zfs-devel=/usr/local' '--disable-shared'
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --format=posix -chf - "$$tardir"
am__untar = tar -xf -
bindir = ${exec_prefix}/bin
build = x86_64-pc-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
demodir = $(docdir)/demo
docdir = ${datadir}/doc/$(PACKAGE)
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-pc-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/green/git/lustre-release/config/install-sh
lb_target_os = linux
libdir = ${exec_prefix}/lib64
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
mandir = ${datarootdir}/man
mkdir_p = $(MKDIR_P)
modulefsdir = /lib/modules/5.14.0rocky96-debug/extra/kernel/fs/lustre
modulenetdir = /lib/modules/5.14.0rocky96-debug/extra/kernel/net/lustre
oldincludedir = /usr/include
patch_avail = 
pdfdir = ${docdir}
pkgexampledir = ${pkgdatadir}/examples
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
quilt_avail = /bin/quilt
rootsbindir = /sbin
runstatedir = ${localstatedir}/run
sbindir = ${exec_prefix}/sbin
sharedstatedir = /var
srcdir = .
sysconfdir = /etc
systemdsystemunitdir = /usr/lib/systemd/system
target = x86_64-pc-linux-gnu
target_alias = 
target_cpu = x86_64
target_os = linux-gnu
target_vendor = pc
top_build_prefix = 
top_builddir = .
top_srcdir = .
#SUBDIRS := . lustre-iokit Documentation \
#	lib lnet/utils lustre/utils \
#	lustre/tests lustre/scripts lustre/conf
SUBDIRS := ldiskfs . lustre-iokit \
	Documentation lib lnet/utils \
	lustre/utils lustre/tests lustre/scripts \
	lustre/conf
DIST_SUBDIRS := ldiskfs \
	lustre-iokit \
	Documentation \
	lib \
	lnet/utils \
	lustre/utils \
	lustre/tests \
	lustre/scripts \
	lustre/conf \
	config

AUTOMAKE_OPTIONS = foreign
UAPI_LUSTRE_EXCLUDE = $(am__append_1)
EXTRA_DIST = lustre.spec	\
	Makefile			\
	Kbuild				\
	config.h.in			\
	lustre-dkms_pre-build.sh	\
	lustre-dkms_post-build.sh	\
	lustre-dkms_post-remove.sh	\
	LUSTRE-VERSION-GEN		\
	LUSTRE-VERSION-FILE		\
	autogen.sh			\
	modules.order			\
	config/lustre-version.m4 \
	contrib \
	lustre/kernel_patches \
	lustre/ChangeLog \
	lnet/ChangeLog \
	debian \
	rpm

all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
am--refresh: autoMakefile
	@:
$(srcdir)/autoMakefile.in:  $(srcdir)/autoMakefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign autoMakefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign autoMakefile
autoMakefile: $(srcdir)/autoMakefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in:  $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
lustre.spec: $(top_builddir)/config.status $(srcdir)/lustre.spec.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre-dkms.spec: $(top_builddir)/config.status $(srcdir)/lustre-dkms.spec.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/6.12-rhel10.1.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/6.12-rhel10.1.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/6.12-rhel10.0.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/6.12-rhel10.0.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.14-rhel9.7.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.7.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.14-rhel9.6.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.6.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.14-rhel9.5.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.5.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.14-rhel9.4.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.4.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.14-rhel9.3.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.3.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.14-rhel9.2.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.2.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.14-rhel9.1.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.1.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.14-rhel9.0.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.14-rhel9.0.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.18-rhel8.10.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.10.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.18-rhel8.9.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.9.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.18-rhel8.8.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.8.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.18-rhel8.7.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.7.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.18-rhel8.6.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.6.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.18-rhel8.5.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.5.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.18-rhel8.4.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.4.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.18-rhel8.3.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.3.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.18-rhel8.2.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.2.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.18-rhel8.1.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.1.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.18-rhel8.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.18-rhel8.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/3.10-rhel7.9.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/3.10-rhel7.9.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/3.10-rhel7.8.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/3.10-rhel7.8.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/3.10-rhel7.7.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/3.10-rhel7.7.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/3.10-rhel7.6.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/3.10-rhel7.6.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/3.10-rhel7.5.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/3.10-rhel7.5.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.14-rhel7.5.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.14-rhel7.5.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.14-rhel7.6.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.14-rhel7.6.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.12-sles12sp4.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.12-sles12sp4.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.12-sles12sp5.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.12-sles12sp5.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/4.12-sles15sp1.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/4.12-sles15sp1.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.3-sles15sp2.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.3-sles15sp2.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.3-sles15sp3.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.3-sles15sp3.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.14-sles15sp4.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.14-sles15sp4.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.14-sles15sp5.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.14-sles15sp5.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/6.4-sles15sp6.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/6.4-sles15sp6.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/6.4-sles15sp7.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/6.4-sles15sp7.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/3.x-fc18.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/3.x-fc18.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.10-oe2203.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.10-oe2203.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.10-oe2203sp1.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.10-oe2203sp1.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lustre/kernel_patches/targets/5.10-oe2203sp2.target: $(top_builddir)/config.status $(top_srcdir)/lustre/kernel_patches/targets/5.10-oe2203sp2.target.in
	cd $(top_builddir) && $(SHELL) ./config.status $@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-zstd: distdir
	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	*.tar.zst*) \
	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: autoMakefile config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
#install-data-hook:
#install-data-hook:
#install-data-hook:
#uninstall-hook:
#uninstall-hook:
#uninstall-hook:
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f autoMakefile
distclean-am: clean-am distclean-generic distclean-hdr \
	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-data-local
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f autoMakefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
.MAKE: $(am__recursive_targets) all install-am install-data-am \
	install-strip uninstall-am

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
	am--refresh check check-am clean clean-cscope clean-generic \
	clean-libtool cscope cscopelist-am ctags ctags-am dist \
	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
	dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-data-hook \
	install-data-local install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
	uninstall-am uninstall-hook

.PRECIOUS: autoMakefile


install-data-local:
	for fname in $$(find include/lustre -type f -name '*.h'); do \
		target=$$(echo $${fname} | sed 's:^include/::g'); \
		$(INSTALL) -D -m 0644 $${fname} $(DESTDIR)$(includedir)/$${target}; \
	done
	for fname in $$(find include/uapi/linux/lnet -type f -name '*.h'); do \
		target=$$(echo $${fname} | sed 's:^include/uapi/::g'); \
		$(INSTALL) -D -m 0644 $${fname} $(DESTDIR)$(includedir)/$${target}; \
	done
	for fname in $$(find include/uapi/linux/lustre -type f -name '*.h'); do \
		base=$$(basename $${fname}); \
		skip=false; \
		for s in $(UAPI_LUSTRE_EXCLUDE); do \
			if test "$$base" = "$$s"; then skip=true; break; fi; \
		done; \
		if ! $$skip; then \
			target=$$(echo $${fname} | sed 's:^include/uapi/::g'); \
			$(INSTALL) -D -m 0644 $${fname} $(DESTDIR)$(includedir)/$${target}; \
		fi; \
	done
	mkdir -p $(DESTDIR)$(modulefsdir)
	for ko in $$(find lustre/ ldiskfs/ -name '*.ko' 2>/dev/null); do \
		$(INSTALL) -m 0644 $${ko} $(DESTDIR)$(modulefsdir)/; \
	done
	mkdir -p $(DESTDIR)$(modulenetdir)
	for ko in $$(find lnet/ -name '*.ko' 2>/dev/null); do \
		$(INSTALL) -m 0644 $${ko} $(DESTDIR)$(modulenetdir)/; \
	done

install-data-hook:
	(cd "$(DESTDIR)$(modulenetdir)"; \
	 $(LN_S) -f in-kernel-ko2iblnd.ko ko2iblnd.ko)

uninstall-hook:
	(cd "$(DESTDIR)$(modulenetdir)"; rm -f ko2iblnd.ko)

dist-hook:
	rm -f $(distdir)/contrib/contrib-kernel-coverage.spec
	find include/ -type f \( -name "*.h" \) \
		-exec cp --parents {} $(distdir) \;
	find lustre/include/ -type f \( -name "*.h" \) \
		-exec cp --parents {} $(distdir) \;
	find lustre_compat/ -type f \( -name "*.c" -o -name "*.h" -o -iname "Makefile" \) \
		-exec cp --parents {} $(distdir) \;
	find lustre/ -type f \( -name "*.c" -o -name "*.h" -o -iname "Makefile" \) \
		-exec cp --parents {} $(distdir) \;
	find lnet/ -type f \( -name "*.c" -o -name "*.h" -o -iname "Makefile" \) \
		-exec cp --parents {} $(distdir) \;
	find $(distdir) -name .deps -o \
			-name CVS -o \
			-name .svn -o \
			-name .git -o \
			-name .#* -exec rm -rf {} \;

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
